Advancement within this organization seems heavily dependent on personal connections rather than merit. If you're not part of the favored inner circle, opportunities for growth or fair compensation can be extremely limited. There’s also a troubling lack of consistent communication and respect. Managers often cancel or avoid one-on-one meetings with employees they don’t personally favor, which limits meaningful feedback and professional development. This favoritism creates a culture where many employees feel overlooked and undervalued. The most disheartening experience was how terminations are handled. In my case, I was let go with no warning—only to later discover that my replacement had already been hired without any communication. To make matters worse, I was terminated despite having a documented disability. Four months after my dismissal, the VA officially increased my disability rating, confirming the seriousness of my condition and raising concerns about how the company treats employees with health challenges. For this organization to improve, it needs to prioritize merit-based advancement, foster open and respectful communication, and treat all employees—especially those with disabilities—with dignity and transparency.
Crown Equipment Corporation
144 open jobsTruck Transportation
Crown Equipment Corporation employee reviews
3.4 out of 5 · based on 841 reviews
Selected employee reviews from Indeed, Blind and CareerBliss: 17 reviews, updated Nov 13, 2026. A selection, not every review of Crown Equipment Corporation.
17 selected reviews
- 2.0May 2025Source: Indeed
- 1.0Jun 2024
I'll start off by saying this could be a fantastic place to work, however what you have here is the buddy club and management who don't want to do anything other than hang out and go outside and smoke cigarettes every 15 to 20 minutes for 15 to 20 minutes then it's back to their cubicle and chit chat and play on their phones, I was given a bunch of false promises before the job started, at the interview they sold me a dream that sounded very good however once I started it definitely hasn't lived up to the hype, they explained in the interview training would be 6 weeks however we're into week 15 and training is still ongoing of course they'll blame it on the system being hacked which was only two weeks ago however it does not explain why the ball hasn't rolled since the 4th week of training so now I basically go to the facility instead of out in the field which is what I was hired for and usually someone's trying to shove a broom in my hand so now I'm at the point where I had to find another position doing pretty much the same job that I was promised here and the great part about that is they started me off with more money a little bit better vacation within the first year sign on bonus and fantastic benefits also, what I would say is definitely do your homework if you're into doing nothing sitting around with a broom in your hand most days wow your supervisors are basically playing on their phones laughing and joking about what who knows then this is the job for you however if you're trying to actually do the job you were hired for which is a technician you might not want to apply here they will make it sound good however don't believe one word that they say this is a complete waste of time learn from my mistake , keep it moving from this place !!!!
Source: Indeed - 1.0Feb 2024
What is the best part of working at the company? The best part of working for Crown Equipment is the available resources in place. Crown is a multi-billion dollar global company with a proven lineup of products and services. What is the most stressful part about working at the company? The most stressful part of working at Crown is the lack of training and coordination. You are often thrown into situations that are entirely new, and there will be no one at your location who is familiar with the process. You are often the ONLY individual responsible for a large portion of the branch operation. Likewise, your counterparts will be responsible for entirely different functions, making in-house collaboration difficult. What is the work environment and culture like at the company? At the branch level, things are often fast-paced but friendly. The corporate environment is entirely unwelcoming and unable to assist you with basic daily tasks. You will receive emails informing you that you are not meeting expectations, but there is often no follow-up or additional information provided. They are only there to let you know that you are not doing a good enough job... not to help you improve in said role. What is a typical day like for you at the company? There are several different internal websites, shared documents, and software programs that must be mastered in order to be effective in this role. Although they all play a role in the daily operation, new employees are given minimal training on some of the systems, and left completely unaware that others exist.
Source: Indeed - 2.0Apr 2022
No Work Life Balance
Software Applications Developer · Former employee · New Bremen, OH
Pros
Headquarters are located in a small town, rural, can be a nice place to live if you can handle the stereotyping. They will send you to one training conference per year. If you are a white male you will generally have a better shot at success here.
Cons
Must be visible at my desk 8am to 5pm with little to no flexibility in that even when you work late to help with issues or take a product across the finish line. Team building events are walking across the stree to the bar to drink and be hit on by coworkers/managers. I was once told I should wear heels, skirts, and dresses to the office more often as opposed to the dress slacks and tops I typically selected. No women or diversity in upper management.
Source: Blind - 3.3
Assembly Mechanic · Wapakoneta, OH
I've worked for Crown for two months now. Great people to work with, friendly environment
Source: CareerBliss - 5.0
Office Assistant · Henderson, NV
I worked at Crown Lift Trucks for four months. I was a temp and worked there from November 2019 through February 2020. I loved working with the people most of all. Everyone was nice and fun to work with. They cared about their product and the success of the company. Great team environment.
Source: CareerBliss - 2.6
Crown Equipment Employee · Tampa, FL
The company isn't a bad company but the people running the Tampa branch are not there for you. They are there to advance what they want and need. Once they have that their behavior towards you changes overnight because the need is gone. But once they need you again they prop you up to make you feel special.
Source: CareerBliss - 3.1
Customer Service Specialist · Aurora, CO
I worked for this company for about months through a temp agency. It was a great position for me to gain experience in managing other employees. Able to do some payroll. This position was very challenging but I was able to get the job done.
Source: CareerBliss - 3.4
Service Technician · Salt Lake City, UT
Great company benefits and on the job training. Decent work and life balance. Not much room to move up in the company.
Source: CareerBliss - 3.9
Crown Equipment Employee · New Bremen, OH
Have worked with them for over 7 years, and in terms of loyalty to their employees and security for the job, nothing but the best. Falls short in competitive benefits when compared to other companies that employ non manufacturing jobs in the same field. Seem to operate on a principle of employees are stuck where they are so they have no choice but to accept benefits as is, regardless of how good they are.
Source: CareerBliss - 2.1
Crown Equipment Employee · Hayward, CA
Upper management consists of men who have only worked for Crown and are lacking needed leadership skills and ethical practices. Sexual harassment and hostile work environment is problematic in mostly management. No signs of improving.
Source: CareerBliss - 4.8
Field Service Technician
Worked at Crown since 2014. I enjoy making my own schedule and the freedom to work at my own pace. Compensation is more than fair plus a company vehicle is provided. If you are a mechanic I would highly recommend this job. Much more satisfying than auto mechanic jobs.
Source: CareerBliss - 2.0
Tool and Die Machinist · New Castle, IN
I worked at Crown for approximately 3 years. I have been a tool and die maker for 30 years in different factories. This is the only job I ever quit without having another job lined up waiting on me. This is the most horrible place I have ever worked. Management wants all the employees to be mindless drones. You are treated like learning disabled 6 year-olds. The pay was fair but did not make up for the rest of the awfulness. Employees are micro managed to such a degree that they cannot take any pride in their job. You are just supposed to be another one of Crown's machines. I got excellent reviews while I was there so this isn't about a disgruntled employee who got fired. Unless you are living under a bridge or something, NEVER accept employment from these arrogant people!!!
Source: CareerBliss - 4.4
Account Representative · Arlington, TX
t work more closely with their sales reps in helping them develope and expand their territory
Source: CareerBliss - 2.3
Territory Manager · Santa Fe Springs, CA
I would make people feel welcome, and needed. I would listen to what everyone has to say.
Source: CareerBliss - 4.5
Crown Equipment Employee
5 years on the job. I have no complaints. It pays very well for our area.
Source: CareerBliss - 4.5
Systems Administrator · Long Beach, CA
Upgrade your system so you can be competetive with other industries
Source: CareerBliss
Worked at Crown Equipment Corporation? Share your experience
Your review helps other job seekers. We check every review before publishing it.
Jobs at Crown Equipment Corporation
View all Crown Equipment Corporation jobs
4 days agoCrown Equipment Corporation
Account representative - outside sales for lift truck leader
Maximize sales of lift trucks and warehouse products within a designated territory. Develop existing accounts and pursue new business opportunities. Analyze market opportunities, build relationships, and create sales strategies and forecasts.
field, Pompano Beach, FL, United States
Full Time
Junior (<2 years)
- 4 days ago
Crown Lift Trucks
Territory sales representative - cm, co, ss, en, ig, e, n & en
Identify and secure new business opportunities, build customer relationships, conduct sales meetings and equipment demonstrations, manage a sales territory, and apply Crown's sales processes and tools.
field, Chelmsford, ENG, United Kingdom
Full Time
Entry with Degree
4 days agoCrown Equipment Corporation
Embedded software engineer (indefinite us work authorization required)
Design and develop embedded software systems for innovative forklifts and material handling equipment. Conduct system analysis, define scope, and create software solutions that meet operational and safety requirements.
hybrid, New Bremen, OH, United States
Full Time
Junior (<2 years)
More company reviews
- John Deere20 selected reviews · Indeed, Glassdoor, CareerBliss
- Carilion Clinic7 selected reviews · Indeed, CareerBliss
- Pike Corporation7 selected reviews · Indeed
- Tetra Tech17 selected reviews · Indeed, Blind, InHerSight, CareerBliss
- Broadcom20 selected reviews · Indeed, Blind, CareerBliss
- International Rescue Committee10 selected reviews · Indeed, Blind, InHerSight, CareerBliss